- #SSD UPGRADE FOR 2013 MAC PRO UPDATE#
- #SSD UPGRADE FOR 2013 MAC PRO PRO#
- #SSD UPGRADE FOR 2013 MAC PRO MAC#
#SSD UPGRADE FOR 2013 MAC PRO MAC#
So, before upgrading your internal MacBook storage, you should ensure the type of storage it implements, as none of them are inter-compatible. You can easily find out what internal storage type your Mac implements by accessing the Storage tab in System Report…Ĭlick on the Apple Logo on the top left corner > About This Mac > System Report > Storage (under Hardware), and look at the Physical Volumes (or Physical Drive for some MacBook models) section. Eventually, SATA-based SSDs were replaced with PCIe-based flash storage in later MacBook models, which supports faster data transfers (up to 25 Gbits/s in case of PCIe 3.0). The first of the flash storage based MacBooks implemented SATA interfacing, which supports transfer speeds of up to 6 Gbits/s (in case of SATA III). Most of the earlier MacBook models (before mid 2012) have standard rotational hard drives, while most of the post mid 2012 models (particularly the Retina ones) have SSDs (flash storage).Įven for MacBooks based on flash storage, its implementation varies in different models. Apart from capacity, MacBook drives also differ in technology.
1.2.2 Storage upgrades for PCIe based SSDsĭepending on the specific model, your MacBook might be equipped with a storage disk ranging anywhere between 128 GB to 1 TB.1.2.1 Storage upgrades for SATA based SSDs.1.1 Upgrading from rotational HDD to SSD.Instead get a Western Digital Black SN750.
#SSD UPGRADE FOR 2013 MAC PRO PRO#
Note: Do not get a Samsung Evo Pro 970 as this is currently causing problems with the Mac. You could then buy a new standard NVMe M2 SSD and use the above Sintech adapter to let it be fitted in to Apple's proprietary socket.
#SSD UPGRADE FOR 2013 MAC PRO UPDATE#
This is done by first installing Mojave on a current internal or external drive and during the Mojave installation it will if needed update the firmware as well. You would first need to ensure your Mac has the correct firmware before trying to fit one of these SSD cards. This is important because the older AHCI SSD drives are becoming rarer as all current computers - including Macs now use NVMe SSD drives.
See - įurthermore whilst originally the Mac Pro 2013 only supported AHCI style SSD drives Apple included in a firmware upgrade the ability to also use NVMe style SSD drives. However there is now on the market an adapter to allow you to fit standard M2 SSDs in to Apple's proprietary socket. OWC do make an SSD with the same proprietary Apple connector meaning it will fit with no extra effort.
This in turn means that if you ask Apple they will probably tell you you need to get a replacement part from Apple. This means a standard M2 SSD will not fit. The Mac Pro 2013 like other Mac models of that era uses a PCIe SSD with a proprietary (Apple) version of the standard M2 connector.
0 kommentar(er)
